Over 65 years of Experience Serving You

Where the best deals are always found in store.

Mon - Fri 10:00AM - 6:00PM
Sat 10:00AM - 5:00PM
Sun Closed

4371 Kingston Rd, Scarborough
416-284-3035

Monitor Audio Bronze W10 Subwoofer (Each) - B6GW10WNU

B6GW10WNU

$1149

Scheduled Delivery

Monitor Audio Bronze W10 Subwoofer (Each) - B6GW10WU

B6GW10WU

$1149

Monitor Audio Bronze W10 Subwoofer (Each) - B6GW10GU

B6GW10GU

$1149

Monitor Audio Bronze W10 Subwoofer (Each) - B6GW10WNU

B6GW10WNU

$1149

Monitor Audio Bronze W10 Subwoofer (Each) - B6GW10BU

B6GW10BU

$1149

CALL FOR FREE CONTACTLESS DELIVERY/PICKUP*


If you love deep and refined bass notes, the Bronze W10 is a must-have addition to your speaker set-up as every soundscape is effortlessly reinforced by our beautifully designed subwoofer.

The Bronze W10’s long-throw 10" C-CAM subwoofer driver combines with the 10" auxiliary bass radiator to bring a vivid realism to any performance.

Our engineers have acoustically improved the driver and bass radiator by reducing the moving masses and tuning the compliances in the system to improve the transient response - kick drumsand explosions now have much more punch and precision. Reduced moving mass and improved rubber feet allows more energy to be transmitted directly into the room rather than being lost through mechanical vibrations through the floor and walls.

The Bronze W10 is a stunning addition to any room.

Key Features

  • Long-throw 10" (250 mm) driver featuring ‘dished’ C-CAM
  • 10" (250 mm) flat panel Auxiliary Bass Radiator (ABR) positioned underneath the unit
  • Class D amplifier with high current Switch Mode Power Supply (SMPSU)
Specifications
System FormatLong-throw 10" driver featuring ‘dished’ C-CAM cone. 10" flat panel ABR (Auxiliary Bass Radiator). 18 mm M.D.F. internally braced construction
Lower Frequency Limit34 Hz (-6 dB)
Upper Frequency Limit50 – 120 Hz with 24 dB/Octave
Drive Unit Complement1 x 250 mm (10") C-CAM subwoofer driver featuring a 2" long throw voice coil
Linear Driver Excursion17 mm peak to peak
Amplifier Output220 W
Amplifier ClassificationClass D with high current Switch mode power supply (SMPSU)
Phase Control0 Degrees & 180 Degree pure Invert
Low Pass Filter Alignment2nd order (12 dB/Octave), from 40 Hz to 120 Hz
Equalisation DSP3 pre-set modes: Music, Movie, Impact
Auto SensingLine Level >3mV. Auto Standby feature after 20 mins
Audio Input/OutputsLFE unbalanced input RCA , Stereo unbalanced inputs RCA
Input Impedance20 kOhms input impedance
12 V Trigger3.5 mm mono mini-jack. 6 V threshold
Electrical CertificationsCE / CB / ETL / Fcc / CCC / ErP (Energy saving compliant)
Mains Input Voltage100 – 120 Vac 50 – 60 Hz / 220 – 240 Vac 50 – 60 Hz (Manually selected)
Power ConsumptionMaximum 300 W, Standby <0.5 W (ErP compliance)
Fuse Type20 mm T4AL 250 VAC
External Dimensions (Including Amp, Drivers and Terminals (H x W x D))321 x 321 x 364 mm (125/8 x 125/8 x 145/16")
External Dimensions (Including Amp, Drivers, Terminals and Feet (H x W x D))366.5 x 321 x 364 mm (147/16 x 125/8 x 145/16")
Weight (unpacked)13.4 kg (29 lb 9 oz)
Sold AsSingle Unit

leave your review


For more than four decades G&G Electronics ......