Monitor Audio Installation Amplifier - IA2002C

SKU : IA2002C

$1,499.00

Literature

The IA200-2C Installation Amplifier supplies up to 200 watts per channel at 4 ohms. A ‘Connect’ amplifier, it employs our Connect IP interface, a web application which can be accessed by any device connected to the internet with a web browser on the same network.

The IA200-2C Installation Amplifier supplies up to 200 watts per channel at 4 ohms. As a Monitor Audio ‘Connect’ amplifier, it utilises our Connect IP interface, a web application which can be accessed by any device connected to the internet with a web browser on the same network.

A slim 1U rack height, it universally fits into most racks whilst delivering 93% energy efficiency. The IP control is via the RJ-45 input, controlling power On/Off, volume, muting, and input source selections. A visual match for the rest of the Monitor Audio Installation Amplifier line, the IA200-2C is ready for any project.

Works with -

Specification
'Connect' IP Control Yes
Channel Number2 (1 Stereo Pair)
Power (W / Channel) | 4 ohms200 W
Power (W / Channel) | 8 ohms150 W
Power (W / Channel) | Bridge (8 ohms)470 W (1CH)
Power (W / Channel) | 70VN/A
Input Impedance20 K ohms
Output Impedance (Loop RCA)600 ohms
Input Sensitivity100 mV / 1 W, 1230 mV – Full power
Maximum Input Voltage2.9 V
Signal to Noise (SN:R)-100 dB (20 Hz – 20 kHz)
Frequency Response5 Hz – 50 kHz
Total Harmonic Distortion THD + N@1 KHz0.03%
Rack Height1U
Dimensions (Excluding Feet (H x W x D))42.4 x 438 x 427 mm (111/16 x 171/4 x 1613/16")
Dimensions (Including Feet (H x W x D))52.8 x 438 x 427 mm (21/16 x 171/4 x 1613/16")
Width (including rack brackets)482 mm (19"
IP CommunicationTCP/IP (RJ-45 10/100 Base T)
Mains Operating Voltage100 – 120 V @ 60 Hz 220 – 240 V @ 50 Hz
Fuse Rating5 A (T5AL ~ 250VAC)
Standby Power Consumption<0.5 W (green mode)
Networked Standby Power Consumption<2 W
Weight5.3 kg (11 lb 10 oz)

Write a review