Over 65 years of Experience Serving You

Where the best deals are always found in store.

Mon - Fri 10:00AM - 6:00PM
Sat 10:00AM - 5:00PM
Sun Closed

4371 Kingston Rd, Scarborough

Buy Online

Monitor Audio Flush Fit Ceiling Speaker CF230


$629 / Each

Free delivery

Scheduled Delivery

Having an internal volume of 24 litres, the IWB-10 is designed to fit between standard 14” stud spacing and comes supplied with adjustable steel fixing brackets. While providing the ideal environment for the driver, the IWB-10 will also reduce the radiation of sound to adjacent rooms.Choose from a beautifully flush fit or discreet, trimless retrofit. Round and square options are on offer, while further choice is provided by the option of ceiling mounting or fitting into a standard stud wall construction.

Used on its own, or in multiples, the CF230 presents beautiful sounding audio from its specially designed coincident driver. Featuring Monitor Audio’s innovative C-CAM metal cone technology and housing both the bass-midrange driver and tweeter within a single assembly unit, the result is superb quality sound from an incredibly compact driver.

In a pre-construction set-up, the CFB3-R & CFB3-SQ enable a seamless, flush fit appearance. You get clean lines, with no shadow-creating edges, and paint the grille to match the ceiling and the speaker disappears even further into the background.

The CFB3-KIT retrofit installation kit cleverly provides a firm fixing behind plasterboard/Sheetrock and requires just three screws to complete the fit. Forget cutting out huge chunks of material, and say goodbye to expensive bracket assemblies.

Add a subwoofer and the result is deep bass to further enhance the already impressive sound. Designed specifically for this model, the driver and chassis is a one-piece moulding, which saves space and enables maximum driver size compared to grille size. The completely enclosed rear assembly, and its fine mesh prevents ingress of dust and residual building materials.

The CF230’s ability to fit into any environment opens up numerous system possibilities. Available in mono or stereo formations, the CF230 provides consistent coverage in a room of around 3m², with a ceiling height of around 2.4m. It’s easy to drive, and its impedance of 8 Ohms means that a single stereo amplifier, such as the Monitor Audio IA150-2, can comfortably power a brace of CF230s.

Journey beyond a four-speaker set-up and a multi-channel amplifier, such as Monitor’s own eight-channel A150-8C, works impeccably well. Whatever the size of the space, the CF230 set-up remains compact, whilst sonically covering a wider area than a conventional in-ceiling speaker, saving on cost as well as visual impact.

Designed and built by people who intimately understand the world of home technology, the CF230 is a shoo-in for any custom speaker project.



Architectural, discreet aperture speaker

Easier and more economical to install than rivals

Can be installed in ceilings and standard stud wall construction

Can be specified for background music system, or 2.1 system with complementary sub-woofer

High-performance C-CAM bass/mid-range and tweeter drivers

Coincident driver arrangement - wider dispersion than conventional C.I speakers

Flush fit or retrofit applications

Unique, patented retrofit bracket system

Designed to complement flush fit downlighting systems

Smaller, higher performance and less costly to install than rivals

Round and square grille options

Enclosed unit to stop ingress of dirt and building materials

High quality 2-way crossover, featuring metallised film capacitors and low loss steel core inductors


Frequency Response (-6 dB)100 Hz – 25 kHz
Maximum SPL98 dBA (each – full range) 103.3 dBA (each – Using crossover)
Drive Unit Complement3" Bass/mid-range driver, featuring C-CAM cone. Coincident mounted 19 mm tweeter with C-CAM Gold Dome
Cut-Out Hole DiameterRetrofit 90 mm / Flush 120 mm
Pre-Construction BracketFlush Fit - CFB3-R Pre-Construction Bracket (round) and CFB3-SQ Pre-Construction Bracket (square) Retrofit - CFB3-KIT Bracket Pre-construction bracket – Pink (included in above kits)
Sensitivity (1W@1M)82.5 dB
Power Handling (RMS)30 Watts (full range – IEC268-5 rating) 100 Watts Music program (Using High Pass crossover filter @120 Hz)
Overall Diameter (Including Grille)112 mm
ConnectionSprung push type terminals – Gold plated
Weight0.35 (kgs) / 350 (grams)
Mounting Depth83.5 mm
Nominal Impedance8 ohms

leave your review

For more than four decades G&G Electronics ......