Monitor Audio Cinergy 200 Range LoudSpeakers - CIN200
CIN200
$5500 / Each
Scheduled Delivery
- CATEGORY: Speaker & Packages
Description
Like the rest of the Cinergy range, the 200 incorporates some very smart features to achieve its effortless performance. On the outside, handy brackets make installation easy. Inside, two mid-range drivers double the power handling, improve efficiency and reduce reflections off ceilings and floors. Together, they ensure everything from the most epic cinematic score to the quietest whisper of dialogue is reproduced beautifully and faithfully.
Key Features
- Unique isolation options reduce unwanted vibrations by up to 18dB for a professional cinema experience
- Rotatable mid-tweeter array
- Numerous mounting options, with a design perfectly suited to an in-cabinet mounting behind an acoustically transparent screen
- Removable port bungs to tailor the bass response along with EQ profiles for use with Monitor Audio Installation Amplifiers
- MPD high-frequency transducer with accuracy, clarity and lifelike sound
- C-CAM mid-range driver with high power handling, high sensitivity, wide directivity
- RDT II bass driver with exceptional high-power handling, high sensitivity, high excursion and low distortion
- Crossover with performance of the highest level, even when pushed hard for long periods of time
- Magnetic grilles to hide drivers and prevent visual reflections from brightly lit cinema screens, when not used with acoustically transparent cloth
| Specification | |
|---|---|
| THX Certification | THX® Certified Ultra |
| Maximum Linear SPL**** (@1m, free space) | Continuous 109 dB, Peak 122 dB |
| Minimum Impedance (20 Hz - 20 kHz) | 3.8 Ohms |
| Bass Alignment | Ported** |
| LF Extension, In Free Space, No Port Bungs (- 6dB) | 47 Hz |
| External Dimensions (Cabinet Only) (H x W x D) | 904 x 300 x 160 mm (359/16 x 1113/16 x 65/16") |
| Product Weight | 30 kg (66 lb) |
| System Format | 3 Way |
| Power Handling (R.M.S) | Continuous 350 W, Peak* 1400 W |
| Recommended Low Frequency Crossover Frequency | 80 - 100 Hz (High Pass) |
| Port Tuning Frequency | 47 Hz** |
| HF Extension (-6dB) | >30 kHz |
| External Dimensions (Inc Grille) (H x W x D) | 904 x 300 x 173.6 mm (359/16 x 1113/16 x 613/16") |
| Sensitivity (2.83 Vrms @ 1 M) | 90 dB |
| Nominal Impedance | 4 Ohms |
| Recommended Amp Requirements (R.M.S) | 200 - 1400 W (IA200-2C or IA800-2C) |
| LF Extension, In Wall, With Port Bungs (- 6dB) | 47 Hz |
| Drive Unit Complement | 2 x 8" RDT Driver, 2 x 2.5" C-CAM Driver, 1 x MPD Transducer |
| Max External Dimensions (Inc all Fittings) (H x W x D) | 904 x 300 x 173.6 mm (359/16 x 1113/16 x 613/16") |
| THX | THX® Certified Loudspeakers. THX® and the THX® Logo are the property of THX® Ltd., registered in the U.S. and other countries. |
| Conditions | Calculated from a peak voltage, this is not a true power figure but useful for comparisons. ** When used in an In-Wall or On-Wall configuration it is recommended to use the fitted port bungs to control bass output. This will effectively make the product a sealed box. *** Band limited with Low pass at 200 Hz, should only be used with IA800-2C and the correct speaker profile.**** Tested with a music like noise signal with distortion and power compression remaining below audible limits. |
For more than four decades G&G Electronics ......
leave your review