Features a 6 1/2 inch C-CAM bass driver and a pivoting IDC module, housing a 4-inch C-CAM RST inverted midrange driver and a 1-inch C-CAM gold dome tweeter. True 3-way design provides rich midrange detail, higher system output, greater power handling, and superior vocal intelligibility and sound localisation. Optimum imaging and set-up are established via the pivoting IDC, high frequency (+3 dB /0 dB / -3 dB) level adjustment, and boundary compensation (on / off) controls.
Optional square grille can be used with model.
|Drivers Unit Complement||6 1/2" C-CAM cone bass driver, pivoting IDC module housing: 4” C-CAM RST inverted mid range driver 1” C-CAM Gold Dome tweeter|
|Recommended Amp Requirements||20 – 85 W|
|Power Handling (RMS)||85 W|
|Maximum SPL||108 dBA|
|Sensitivity (1W@1M)||88.5 dB|
|Nominal Impedance||6 ohms|
|Frequency Response||60 Hz – 30 kHz|
|Pre-Construction Bracket||CB6 (Purple)|
|Weight||2.54 kg (6 lb 10 oz)|
|Construction Material||Mineral filled ABS, RoHS compliant|
|Fixing Type||3 position Tri-Grip dog fixings|
|Cut-Out Hole Diameter||211 mm (8 1/4")|
|Mounting Depth||149 mm (5 7/8")|
|Overall Depth: (including grille)||153 mm (6")|
|Overall Diameter: (including grille)||250 mm (9 13/16")|
|Adjustment Controls||HF Level Switch (+3 dB / 0 dB / -3 dB) Boundary Compensation Switch|
Four more than four decades G&G Electronics ......