JL Audio 10-inch Subwoofer Driver, 4 Ω 10W1v3-4



(416) 282-8111

W1v3 10-inch Subwoofer Driver (300 W, 4 Ω)

The 10W1v3 is an outstanding choice when space is very tight and amplifier power is moderate. It features shallow mounting depth (4.6 in. / 117 mm) and a compact motor structure, allowing it to comfortably fit in a lot of spaces where a typical 10-inch driver will not. Lacking a pole vent, the rear of the motor structure can be placed directly against an enclosure boundary.  Excellent excursion capability and linearity allow it to reproduce sub-bass with shocking extension and quality. Several of JL Audio's proprietary technologies enhance its performance and reliability.
The 10W1v3-4 is best used with amplifier power in the 75W - 300W range and is optimized to operate in a compact 0.55 cu. ft. (15.57 l) sealed enclosure. Detailed enclosure recommendations can be found in the "Specifications" tab.

Continuous Power Handling (RMS)300 W
Recommended Amplifier Power (RMS)75 - 300 W
Nominal Impedance (Znom)4 Ω
Physical Specifications
Nominal Diameter 10.0 in / 250 mm
Overall Diameter (A)10.5 in / 267 mm
Mounting Hole Diameter (B)9.0625 in / 230 mm
Bolt Hole Circle Diameter (C)9.7 in / 246 mm
Motor Outer Diameter (D)4.92 in / 125 mm
Mounting Depth (E)4.6 in / 117 mm
Driver Displacement0.037 cu ft / 1.05 L
Net Weight 9.9 lb / 4.5 kg
Free Air Resonance (Fs)26.15 Hz
Electrical “Q” (Qes)0.475
Mechanical “Q” (Qms)7.243
Total Speaker “Q” (Qts)0.446
Equivalent Compliance (Vas)1.533 cu ft / 43.41 L
One-Way Linear Excursion (Xmax)*0.45 in / 11 mm
Reference Efficiency (no)0.16%
Efficiency (1 W / 1 m)**84.2 dB SPL
Effective Piston Area (Sd) 53.584 sq in / 0.0346 sq m
DC Resistance (Re)3.902 Ω

leave your review

Four more than four decades G&G Electronics ......