Monitor Audio - MASS Center (Each)

MASS Center

(416) 282-8111

The compact two-way MASS 10 Centre speaker is a stylish construction of rigid polymer, enveloped in a black cloth finish and crowned at either end with contrasting solid aluminium end caps. Its 1-inch C-CAM tweeter has a new low-profile design, conceived to maximise performance in reduced cabinet volumes. A 4-inch C-CAM mid-bass driver is tie-bolt fixed to the back of the cabinet for reduced colouration and the Hive reflex port is rifled to optimise airflow and limit turbulence. The MASS 10 Centre can be wall mounted using a single point fixing located on the rear panel, which dovetails with an optional universal wall bracket for an easy, secure and reliable solution. When shelf or rack mounted, a soft rubber puck is supplied to tilt the speaker toward the listener and also to inhibit any unwanted transfer of vibration.



  • 4" bass midrange driver featuring C-CAM cone technology.
  • Specially developed 1" C-CAM tweeter design featuring unique venting and rear loading chamber low resonance design to provide clean, pure sound.
  • Damped polymer moulded cabinet with internal ribbing.
  • The curved shape helps to eliminate un-wanted standing waves.
  • Single point fixing (1/4" UNC) for universal wall bracket installation (not provided).
  • Concealed, discreet cable termination inside end cap using binding post type connection.
  • Single bolt through driver and bracing system, for increased overall bracing and rigidity.
  • Single rear mounted port featuring HiVe technology for clean, powerful, punchy bass.
  • Black cloth finish with contrasting solid aluminium end caps.
  • Optional floor-stand with internal (pre-wired) cable management system.



C-CAM Drivers

Ceramic-Coated Aluminium/Magnesium is a material originally developed by the aerospace industry for jet engine components. Its properties are ideal for loudspeaker cones being extremely rigid, yet light enough to yield high overall efficiency. In manufacture, aluminium/magnesium alloy undergoes a three-stage stress-relieving process to remove surface deformation and molecular weakness. Once formed, the alloy cone is subjected to a high temperature anodic coating process in which a layer of pure ceramic alumina is depleted onto its surfaces to a depth of 50 microns, producing a completely rigid sandwich of alloy and heat-dissipating ceramic material.

Gold Dome C-CAM

The gold dome tweeter is formed from a ceramic-coated aluminium/magnesium alloy, gold anodised to a specific thickness for ideal stiffness and damping characteristics. Its new profile and surround geometry have been developed using advanced modelling tools, to provide the optimum qualities for accurate sound reproduction. The new design moves the first order of breakup to beyond 35kHz, producing a linear response way beyond audibility, which matches the wide frequency bandwidth available from HD music and cinema sound formats.

HiVe II Port Technology

A new type of port technology which uses a straight rifled design to accelerate air flow and reduce turbulence. HiVe II technology has the ability to move air in and out much quicker than a conventional port, the result is fast powerful bass coupled with superior transient response.

Rated Continuous Power @14.4V
Frequency Response80Hz – 30kHz
System Configuration2- way
Driver complement1 x 4" C-CAM Bass/Mid-range Driver1 x 25mm C-CAM tweeter with vented loading system
Nominal  Impedance8 ohms
Maximum SPL (each @1M)104 dBA
Power Handling with amplifier  crossover set to 100hz (RMS)100 watts
Power Handling (individual)40 watts
Recommended Amplifier Requirements25-100 watts
Recommended High Pass  Crossover Frequency80-120Hz
Bass AlignmentReflex Rear Ported
Overall Dimensions (H x W x D)128 x 228 x 128 mm 51/16 x 813/16 x 51/16 Inches
Weight1.65kg (3lb, 10oz)

leave your review

Four more than four decades G&G Electronics ......