The compact two-way MASS 10 satellite speaker utilises a 1-inch C-CAM® and A 4-inch C-CAM mid-bass driver. The MASS 10 satellite can be wall mounted or used with the dedicated MASS floor-stand.
4” bass midrange driver featuring C-CAM® cone technology.
Specially developed 1” C-CAM tweeter design featuring unique venting and rear loading chamber – low resonance design to provide clean, pure sound.
Damped polymer moulded cabinet with internal ribbing.
The curved shape helps to eliminate un-wanted standing waves.
Single point fixing (1/4” UNC) for universal wall bracket installation (not provided).
Concealed, discreet cable termination inside end cap using binding post type connection.
Single bolt through driver and bracing system, for increased overall bracing and rigidity.
Single rear mounted port featuring HiVe® technology for clean, powerful, punchy bass.
Black cloth finish with contrasting solid aluminium end caps.
Optional floor-stand with internal (pre-wired) cable management system.
|Frequency Response||80Hz – 30kHz|
|System Configuration||2- way|
|Driver complement||1 x 4" C-CAM Bass/Mid-range Driver 1 x 25mm C-CAM® tweeter with vented loading system|
|Nominal Impedance||8 Ohms|
|Maximum SPL (each @1M)||104 dBA|
|Power Handling with amplifier crossover set to 100hz (RMS)||100 watts|
|Power Handling (individual)||40 watts|
|Recommended Amplifier Requirements||25-100 watts|
|Recommended High Pass Crossover Frequency||80-120Hz|
|Bass Alignment||Reflex Rear Ported|
|Overall Dimensions (H x W x D)||224 x 128 x 128 mm 813/16 x 51/16 x 51/16 Inches|
|Weight||1.65kg (3lb, 10oz)|
Four more than four decades G&G Electronics ......