JL Audio 10-inch Subwoofer Driver, 2 Ω 10W1v3-2

10W1v3-2

$289.95

NEED HELP? GET EXPERT ADVICE
(416) 282-8111



W1v3 10-inch Subwoofer Driver (300 W, 2 Ω)

The 10W1v3 is an outstanding choice when space is very tight and amplifier power is moderate. It features shallow mounting depth (4.6 in. / 117 mm) and a compact motor structure, allowing it to comfortably fit in a lot of spaces where a typical 10-inch driver will not. Lacking a pole vent, the rear of the motor structure can be placed directly against an enclosure boundary.  Excellent excursion capability and linearity allow it to reproduce sub-bass with shocking extension and quality. Several of JL Audio's proprietary technologies enhance its performance and reliability.
The 10W1v3-2 is best used with amplifier power in the 75W - 300W range and is optimized to operate in a compact 0.55 cu. ft. (15.57 l) sealed enclosure. Detailed enclosure recommendations can be found in the "Specifications" tab.

Specification
Continuous Power Handling (RMS)300 W
Recommended Amplifier Power (RMS) 75 - 300 W
Nominal Impedance (Znom) 2 Ω
Parameters
Free Air Resonance (Fs)25.23 Hz
Electrical “Q” (Qes)0.463
Mechanical “Q” (Qms)7.246
Total Speaker “Q” (Qts)0.436
Equivalent Compliance (Vas)1.559 cu ft / 44.15 L
One-Way Linear Excursion (Xmax)* 0.45 in / 11 mm
Reference Efficiency (no) 0.15%
Efficiency (1 W / 1 m)**83.9 dB SPL
Effective Piston Area (Sd)53.584 sq in / 0.0346 sq m
DC Resistance (Re)2.233 Ω

leave your review


Four more than four decades G&G Electronics ......