Monitor Audio Subwoofer - CW8 (Each)

CW8

NEED HELP? GET EXPERT ADVICE
(416) 282-8111



The new CW8 places all the power in the hands of installer and client. 

Each little bass-engine is generously specified with custom installation in mind, providing versatile input and control options including RS232 and a dedicated 'SubConnect' PC applet via a wired USB interface.

 

Technology

  • Ultra-compact 'cube' shape designs
  • Twin side-mounted ABRs for increased output and reduced distortion. Higher output than a sealed box and better control and zero air noise compared to a ported box
  • High excursion woofers featuring signature C-CAM cone technology
  • High-power Class-D amplifier delivering 400 watts
  • DSP processing all functions performed in the digital domain for precise control
  • RS-232 for integration with system controllers
  • SubConnect' PC Applet for full feature adjustment, installer set-up and firmware update using USB
  • LFE Balanced XLR and unbalanced RCA Inputs
  • Stereo RCA line level inputs
  • Phase switch (0-180 degrees)
  • 12V trigger and auto signal sensing with timer control
  • 4 x pre-set equalisation optimised for music, movie, flat and impact with customisation through SubConnect Applet
  • Robust metal mesh grille on front woofer
  • Rigid MDF cabinet construction with durable vinyl finish

 

 
Rated Continuous Power @14.4V
System FormatActive sub-woofer system – twin ABR. 18mm MDF cabinet (CARB2 approved)
Low Frequency Limit35Hz (-6dB)
Amplifier Power Output350W RMS @ < 1% THD+N
Maximum SPL105.8dBA
Amplifier ClassificationClass D amplifier with Switch mode power supply (SMPSU)
InputsStereo RCA LFE (RCA) LFE Balanced (XLR)
EQ ProfilesFlat/ Music/ Movie/ Impact
Phase Control0 & 180 degrees
Auto SensingLFE Input <2mV Auto wireless audio input signal detection
Auto StandbyAfter approximately 15 minutes if no signal sensed Wireless audio source turned off
Driver Compliment1 x 8" (200mm) C-CAM long throw driver, 2 x 8" (200mm) ABR
Input Impedance> 20KΩ
Mains Input Voltage110 - 120 Vac / 220 - 240 Vac 50/60Hz (Manual Switch selection)
Dimensions(H x W x D) (Inc fitted feet)270 x 260 x 276mm 10 5/8 x 10 1/4 x 10 7/8"
12V Trigger Input5 - 12V via 3.5mm mono mini-jack socket
Power ConsumptionStandby: < 0.5W (ErP approved) Typical Idle: < 10W Max Rated: 400W

leave your review


Four more than four decades G&G Electronics ......