Suitable for ground level installation within the garden and around decking areas or mounted onto a tree, pole or garden fence, the new CLG160 speaker features a rigid cast polymer shell which ensures it is resilient to extreme weather conditions.
Installation is simple, thanks to the requirement for the speaker to be wired in a mono configuration and powered by one amplifier channel. The other amplifier channel can be used to power the subwoofer. This configuration allows the levels between bass and mid-high range to be easily equalised. Alternatively, the system can be designed to provide stereo operation if desired by creating stereo left/right zones.
Despite being installed outside, the aesthetics of the speakers are just as important. Finished in dark brown, the CLG160 blends seamlessly into this environment to provide high quality sound for outdoor entertainment, whilst not distracting from the landscape. The speaker casing can be painted a different colour, if required.
|Rated Continuous Power @14.4V|
|Frequency Response (-6dB)||80Hz – 30KHz|
|Line Level Voltage||70/100 Volt line level|
|Maximum S.P.L||107 dBA|
|Power Handling||60 Watts (crossover set to minimum 80Hz@12dB/Octave)|
|Amplifier Requirements (RMS)||10-60 watts per speaker|
|Driver Complement||1 x 6" MMPII cone bass-mid driver1 x 25mm C-CAM Gold Dome tweeter – Coaxially oriented|
|Crossover Recommendation (high pass)||80Hz at a minimum of 12dB/Octave (24dB/Octave optimum)|
|External Dimensions, excluding spike/ mount (Diameter x D)||19 dia x 22 deep (cm)|
|Bracket Pivot Angle||180 degrees|
|Connection||Encapsulated cable connection|
|Environmental Protection Rating||IP55|
|Operating Temperature Range||-20° to 70° C / -4° to 158° F|
|Finishes Available||Dark Brown|
Four more than four decades G&G Electronics ......